Jenway 6305 User Manual

Operating Manual 635 015 REV B/06-14 Model 6305 Spectrophotometer

10SECTION 2 – Installation 2.1 UNPACKING Remove the 6305 from the packaging and ensure the following items are included: 1. Model 6305 spectropho

11 display before displaying the main measurement screen. Please note that the instrument will go to the last wavelength and measurement mode used.

12 Fig. 2.4.1 – Controls 1. Arrow Keys: Used to adjust values on the selected display 2. Arrow Keys: Used to move the cursor horizontally betwee

13 1. Lamp access panel Allows access to lamp when replacement is necessary (6300 and 6320D only) Refer to section 8.2 for xenon lamp replacement

14SECTION 3 – Theory and Practice of Spectroscopy Measurements 3.1 THEORY OF SPECTROSCOPY MEASUREMENT UV-visible spectroscopy is the measurement

15 3.2 SPECTROSCOPY MEASUREMENT There are four main components of a spectrophotometer. These are a light source to emit a high and constant amount

163.3 GOOD PRACTICE GUIDELINES 1. For optimum performance all spectrophotometers should be sited in a clean, dry, dust free atmosphere.

17 h) Flow-through cuvettes must be selected with care and consideration for the sample type, sample volume, pumping system, rinse, samp

18SECTION 4 – PHOTOMETRICS MEASUREMENTS The 6305 can perform simple measurements of % transmittance or absorbance. The sample is measured at one w

19 SECTION 5 – CONCENTRATION MEASUREMENTS The concentration measurement mode enables simple measurements of concentration to be performed

2

20SECTION 6 – CONNECTING TO A PC Connect the interface cable to the RS232 serial port on the rear of the instrument and connect to the serial port

21 calibrated. ASCII SO<CR> Opens the dark shutter which allows monochromatic light to enter the sample chamber. This allows 100

226305 IBM PC XT (9 way “D”) TDX 2 3 TXD (From PC) RXD 3 2 RXD (To PC) RTS 4 7 RTS (From PC) CTS 5 8 CTS (To PC) DSR

23 SECTION 7 – Accessories and Spare Parts 7.1 OPTIONAL ACCESSORIES Part Code Description of Accessory 634 001 4 position manual cuvette holder 6

24SECTION 8 – Maintenance and Service 8.1 ROUTINE MAINTENANCE Ensure the external surfaces of the unit are clean and free from dust. The sample

25

268.3 SERVICE Our dedicated service staff are on hand to help in the unlikely event that your Jenway equipment develops a fault. Please contact t

27 SECTION 9 – Troubleshooting 9.1 ERROR CODES Refer to the table below to diagnose error codes. If you require further assistance contact Jenway

28SECTION 10 – Declaration of Conformity

29 Bibby Scientific Ltd Bibby Scientific France SAS Bibby Scientific Ltd. – Singapore Beacon Road Stone ZI du Roc

3 Safety Please read this information carefully prior to installing or using this equipment. 1. The 63 series spectrophotometers are designed for

4respectées. En cas de doute, contactez une personne compétente afin d'obtenir des conseils avant de procéder à l'installation

5 5. Dieses Gerät ist für minimale Wartungsarbeiten ausgelegt, die unter Einhaltung der in diesem Handbuch dargelegten Verfahren s

6mantenimiento por parte de personal no cualificado dará lugar a la invalidación de la garantía y podría causar gastos adicionales de

7 eseguire misurazioni e analisi con questo strumento. Attrezzature idonee per la protezione personale e la sicurezza vanno utilizzate in

8Contents SECTION 1 - Introduction ....... 9 1.1 INSTRUMENT DESC

9 SECTION 1 - Introduction 1.1 INSTRUMENT DESCRIPTION The 6305 spectrophotometer is suited to a wide range of applications in education, quality c