Jenway 3540 User Manual download pdf (Page 78)

Setting of these options is detailed in Section 3.37 and 3.38

The Model 3540 supports both hardware (CTS/RTS) flow control and software XON/XOFF

flow control.

Pressing the PRINT key outputs from the RS232 interface.

Sending an ASCII “D” to the 3540 causes a printout of the current displayed reading, plus

sample number.

Sending an ASCII “C” causes a printout of the last calibration parameters.

Sending an ASCII “P” causes a printout of the stored readings.

10.4 Keypad emulation

Keypad remote control using RS232 interface:

7 - Instrument On / Standby / Escape

1 - Calibrate / Memory Clear

9 - Print

8 - Up Arrow

2 - Down Arrow

4 - Left Arrow

6 - Right Arrow

3 or 5 - - Enter / Store

10.5 Printing

A 32-column serial printer (037 701) is available for use with the Model 3540.

Serial Cable Connection

Connect the serial cable supplied with the printer to the 9 way socket located on the rear

panel of the instrument.

To initiate a print out of data press the PRINT key.

When the first print is performed a header section will be printed showing:

Instrument name

Time and Date

Spacing for entry of Operator & User ID

Operator ID number

1 2 ... 73 74 75 76 77 78 79 80 81

No comments

Jenway 3540 User Manual Page 78